Arisfor WallGuard®

Arisfor WallGuard® is a three component polymerized cementitious protective coating that can be applied to a variety of vertical interior and exterior substrates including: stucco, exterior gypsum sheathing, ICF blocks, masonry, concrete, wood, metal and tile.

WallGuard has superior adhesive properties and is extremely durable. This unique coating is abrasion resistant, impact resistant and water resistant while allowing for the transmission of moisture vapor from the substrate. Strong and sound, WallGuard provides long lasting protection in any temperature or climate.

Read more about  Arisfor Bond and  Arisfor Mesh.

Long lasting design with top of the line results – for existing or new construction projects.

Add Appeal without Compromising Durability

Arisfor WallGuard is an easy to apply protective coating that makes it simple to complete new construction or repair your damaged stucco or any other existing surface. Arisfor WallGuard comes in a variety of colors, for a variety of substrates, with a variety of finishes. No need to resurface or reseal for up to 10 years! Never choose between durability and a beautiful finish again.

Want to Add Color and a Particular Finish? See the WallGuard® Color Options and Finishes.

10 Years Later

Don’t Let the Elements Wear You Down

Blocks MoistureArisfor WallGuard is a three-component protective coating that has superior durability compared to traditional stucco products. Arisfor WallGuard’s impact and abrasion resistance give your surface complete protection from moisture, salt, and UV damage. With Arisfor WallGuard’s superior adhesion, it may be applied to almost any surface with no primer needed and minimal surface preparation.

Apply in a Third of the Time

Unlike traditional stucco products, Arisfor WallGuard is a one coat process that is easy to apply! Arisfor WallGuard allows you to be back in service within 2-4 hours –  saving you on labor costs!

Want to see how easy it is to apply? Watch WallGuard® Application Video!

Four Step Process


COATINGS EXPERTS ON STAFF Ready to Answer Questions & Aid in Technical Support

Made in the USA

Superior Adhesion

  • Adheres to multiple substrates
  • Minimal surface preparation


  • Provides longer service life
  • Impact & Abrasion Resistant
  • Resists Cracking

Quick Dry Time

  • Back in service quicker


  • Allows moisture to pass through from substrate
  • Allows evaporation

UV Resistant

  • Fade Resistant
  • Integrally colored

Water Resistant

  • Retards mold and mildew
  • Resists 100 mile per hour wind driven rain

Easy to Apply

  • One day application by brush, roller, trowel, squeegee, or spray.

Fire Resistant

  • Low Flame Spread Index(ASTM E-89-89a)

Salt Resistant

  • Can be used in coastal areas

Arisfor WallGuard® can be applied to new or existing substrates by brush, roller, trowel or spray. Arisfor WallGuard® can be used as a traditional stucco replacement or restore and reinforce existing cracked stucco or spalled concrete. WallGuard® can be painted or stained and made to look like a variety of textures such as knock down, orange peel, splatter or skip trowel. Arisfor WallGuard® is easy to apply and dries to the touch within 2-4 hours. There are many advantages and features that make WallGuard® a superior product: Arisfor WallGuard® is moisture permeable and protects against water intrusion. WallGuard® has zero VOC content, meets LEED point criteria, is fire resistant and is available in 5 standard colors.

  •  Arisfor Bond (liquid component) | One (1) six (6) gallon pail
  •  Arisfor WallGuard® (cement based component) | Five (5) 50-lb bags
  •  Arisfor Mesh (fiberglass mesh component) | One (1) 475 sq. ft. roll

Coverage of the unit may range from 200-450 square feet depending on the desired finish, texture, and porosity of the substrate.

  •  Arisfor Bond (liquid component) | Six (6) gallon pail
  •  Arisfor WallGuard® (cement based component) | 50-lb bags
  •  Arisfor Mesh (fiberglass mesh component) | 475 sq. ft. roll (38 inches x 150 ft.)


All surfaces that are to be coated with Arisfor WallGuard® must be sound and free from any bond obstructing substances such as loose debris, grease, oil and any other contaminates or impeding materials. Sweep away any standing water from application site. Surface and ambient temperature required to be 40˚F (5˚C) and rising.


Always pour Arisfor Bond into the mixing container first. Gradually add cementitious component and mix with a slow speed drill (400-600 rpms) and high viscosity mixing paddle. Mix ratios range from 4 quarts of Arisfor Bond to achieve trowel grade consistency and up to 6 quarts of Arisfor Bond for a slurry consistency for each 50 lb. bag. Mix a minimum of 3-5 minutes to achieve a homogeneous lump-free blend. Let mixture rest for 5-8 minutes prior to application. Remix before beginning application. To keep color consistency, the same mix ratios should be used when mixing additional bags. DO NOT MIX WITH WATER.


Arisfor WallGuard® may be applied by brush, roller, trowel, or spray. Apply one layer of WallGuard® to substrate and then embed the mesh, working from the center to the edges, while mixture is still wet. Lightly use trowel to fully encapsulate mesh. The base material should be approximately 1/16” to 1/8” thick. Additional layers may be applied to ensure mesh is uniformly covered and the desired finish is achieved. Dries to the touch in 2-4 hours. Clean tools with water before product permanently adheres. Floors, windows, metal door frames or any surface not intended to be coated, should be wiped clean using a wet cloth within minutes of application to avoid permanent adhesion.


Moving cracks may reflect in finished product
Do not apply over expansion joints
Product working time is approximately 45 minutes at 70˚F (21˚C).


  • Start in the middle of project and work outward
  • Clean tools periodically with clean water throughout application process & clean fully at end
  • When trowelling, keep tools coated with liquid bond.
  • A spray bottle of liquid bond is recommended. If material sets rapidly, spray on liquid bond to refresh wet material to achieve desired finish.

Calculate Your Savings!
Select Unit:US TonMetric Ton
Enter Asphalt:

Enter Asphalt Price:
FORTAfied asphalt for Tons of Savings!

Use our Savings Calculator to compare material costs between a traditional asphalt mixture and FORTAfied Asphalt.

Original Asphalt Cost:

Reduction in Asphalt Thickness:

Reduced Asphalt Cost:
Cost of FORTA-FI (based on MSRP):

FORTAfied Asphalt Cost =

Material Cost Savings =
Savings in Tons =